9.2.19. Remove the USB cable (A-WiFi)
1. Remove the screw (×1
2. Remove the USB cable (A-WiFi).
9.2.20. Remove the Metal bracket bottom
1. Remove the screws (×4
bracket bottom.
9.2.21. Remove the K-Board
1. Remove the screws (×2
case.
2. Disconnect the connector (K10).
3. Remove the claw (×1
4. Remove the LED panel.
).
, ×2
) and the Metal
) and remove the LED panel
) and remove the K-Board.
9.2.22. Remove the Cabinet assy from the
Plasma panel section
1. Place the Cabinet assy on a flat surface of a table
(covered by a soft cloth) and a cushion.
2. Remove the screws (×15
3. Remove the Cabinet assy from the Plasma panel section.
23
).