Contents 1 Important Hearing Safety General information 2 Your Bluetooth sports headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Use your headset...
1 Important General information To avoid damage or malfunction: Caution Hearing Safety • Do not expose headphones to excessive heat. • Do not drop your headphones. • Headphones shall not be exposed to dripping or splashing. • Do not allow your headphones to be submerged in water.
Bluetooth and is compatible to the headphones. Congratulations on your purchase, and Overview of your Bluetooth welcome to Philips! To fully benefit from the support that Philips offers, register your product wireless headphones at www.philips.com/welcome. With this Philips sports headphones, you can: •...
Activate the Bluetooth feature of your connecting the headphones for charging will power the headphones off. mobile phone, select Philips SHB5000. Enter the headphones password "0000" Connect the supplied USB charging cable to: (4 zeros) if prompted. For those mobile •...
4 Use your Turn the Press and hold • 4 scale headphones for 4 tones from headphones off. seconds. high to low • White LED flashes and goes out Connect the headphones to a Play or pause Press Bluetooth device music.
Other headphones indicator status Headphones status Indicator The headphones are The blue LED connected to a Bluetooth flashes for every device, while the 6 seconds. headphones in standby mode or while you are listening to music. The headphones are ready The LED flashes for pairing.
5 Technical data • Up to 9 hours of play time or talk time • Up to 200 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-Polymer battery (200 mAh) • Bluetooth 3.0, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile...
We strongly advise you to take your product to This product complies with all applicable an official collection point or a Philips service standards and regulations regarding exposure to centre to have a professional remove the electromagnetic fields.
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Make sure the Bluetooth audio source supports you see the blue LED only. AVRCP (see 'Technical data' on page 7). The mobile phone cannot find the For further support, visit www.philips.com/ headphones. support. • The headphones may be connected to a previously paired device.