Vibrate Settings - Motorola NNTN7983A User Manual

In most cases, when you delete a ring tone that you
purchased from your phone, you will have to purchase
it again.
To delete a ring tone:
Press /
1.
> Multimedia > Ring Tones
2.
Make sure
Vibrate All
Highlight a ring tone and press /
3.
4.
Press (left softkey) to confirm.
Yes

Vibrate Settings

Vibrate All
The Vibrate All option allows you to be notified of calls
and messages with a vibration instead of an audible
alert.
To activate Vibrate All:
Press and hold the volume button down in standby
mode. (Pressing and holding displays "VibeAll:
On." Continuing to hold the button down displays
"VibeAll: Locked.")
– or –
72 6. Settings
.
is set to .
Off
.
> Delete
Press /
> Multimedia > Ring Tones > Vibrate All
Set this option to
On
Tip:
Setting this option to Locked requires you to press and
hold the volume control up to turn
Locked option helps prevent you from accidentally
turning Vibrate All off.
To deactivate Vibrate All:
1. Press and hold the volume key up to unlock
vibrate all.
2.
Press the volume key up repeatedly to select a
volume level or press /
Ring Tones > Vibrate All > Off
These icons indicate how the ringer is set:
The phone always vibrates instead of
/
making a sound.
The phone vibrates instead of making a
.
sound for phone calls.
" Direct Connect calls, Group Connect calls,
and Talkgroup calls are heard through the
earpiece, not the speaker.
.
or
Locked
Vibrate All off. The
> Multimedia >
.
.