Motorola NNTN7983A User Manual page 55

the participants. In these calls, others using the same
channel cannot listen in.
When using Direct Talk mode, the two phones should
be a minimum of six feet apart to maximize
performance and improve transmission range. You can
only make Direct Talk calls to users located within your
range. This varies according to terrain, man-made
structures, and atmospheric conditions.
Most traditional phone features are not available in
Direct Talk mode, including on-network phone calls;
Direct Connect, Group Connect, Talkgroup calls, and
Call Alerts; data services; messaging; call timers; and
call forwarding.
Setting Your Phone to Direct Talk
Before you and another caller can use Direct Talk, both
of your phones must be set to Direct Talk mode.
Press /
1.
> Push To Talk > Direct Talk
2.
Select
Go To Direct Talk
After a few seconds, your channel and code appear on
the display screen. Your phone displays the last
channel and code used for Direct Talk.
.
.
To return to network mode from Direct Talk:
Press /
1.
> Push To Talk > DT Options
2. Select
Exit Direct Talk
After a few seconds, your phone returns to network
service.
Code Direct Talk Calls
To make Direct Talk Code calls, both parties must be
on the same channel and code and have their phones
set to Direct Talk. Anyone within range who is set to the
same code and channel can hear all conversations.
To set a channel and code:
1.
In Direct Talk mode, press
, and then select a channel.
Channel
2.
Select Code and select a code.
3.
Press (right softkey) to return to the Direct Talk
Back
standby screen.
3. Making and Answering Calls
.
.
(left softkey)
Edit >
45