Table of Contents
Advertisement
4. OPERATION
4.1 Preparing For Use
4.1.1 Unfolding
Holding the armrests, pull outwards. (See Figure 4.1)
Pointing your fingers inward with the palm of your hand on the frame, push
down until the seat is fully lowered. Make sure the frame is firmly seated in
its holder. (See Figure 4.2)
Holding the swing-away footrest, lower it into its coupling at 45° from the side.
Swing the footrest towards the middle until you hear it click into place. (See
Figure 4.3)
Flip the footplates down. (See Figure 4.4)
Attach the headrest and tighten the knob bolts. (See Figure 4.5)
Ready for action!
CAUTION:
Please be sure to tighten the knob bolts of the headrest or else it might result
in injury to the user or damage to the wheelchair.
Alternatively, you can stand at the side of the chair and complete step 1 by
pulling the nearest armrest towards you and pushing the other one away.
Figure 4.1
Figure 4.4
CAUTION:
Be careful not to get your fingers caught when folding the wheelchair.
Figure 4.2
Figure 4.5
9
Figure 4.3
Advertisement
Table of Contents
