Setup Instructions - Mad Catz R.A.T.M Manual

SEtUP INStRUCtIoNS

CoNNECtING tHE MoUSE USING tHE DoNGLE
1. Insert 2 x AAA batteries into the mouse
2. Plug the USB dongle into an available port
3. Turn the mouse ON
CoNNECtING to DEVICES WItH BUILt-IN BLUEtootH
tECHNoLoGy (DoNGLE Not REqUIRED)
BLUEtootH SMARt tECHNoLoGy
Bluetooth Smart is a new, power-efficient version of Bluetooth wireless technology
and is already being used in many devices. Check with your manufacturer to see if it is
Bluetooth Smart ready. Check with your device manufacturer for support for Bluetooth
Smart mice and then follow their instructions for pairing.
WINDOWS 8
®
1. Ensure the USB dongle is unplugged and power the R.A.T.
2. Press and hold the 5D™ and Wing buttons for 5 seconds until the Blue LED starts
flashing
3. Move mouse to bottom right corner of the screen to open the Charms bar
4. Click Settings
5. Click Change PC Settings
6. Click Devices
7. Click Add a device
M
8. Select R.A.T.
®
M
.7
SMARt
on