Download Print this page

PheeNet MJCAS-210IR Quick Installation Manual

Hide thumbs Also See for MJCAS-210IR:

Table of Contents

Need help?

Do you have a question about the MJCAS-210IR and is the answer not in the manual?

Page 2 Table of Contents Requirements Physical Installation Camera administration Further Configuration Thank you for purchasing PheeNet’s Network Camera for IP surveillance applications. Before installation, please be sure to read this quick installation guide and user’s manual carefully to complete machine installation.
Page 3: Physical Installation
Requirements MJPEG Network Camera Network Environment 10/100M Ethernet Monitoring System Recommended System Hardware · CPU: Pentium III, 800 MHz or above · Memory Size : 128 MB (256 MB Recommended ) · VGA card resolution : 1024 x 768 or above System Requirement for Viewer &...
Page 4 The Network Camera provides GUI ( Web based, Graphical User Interface ) for machine management and maintenance. When you installed your IP camera over your network environment, to start Network Camera web configuration, you must have the web browsers installed on computer for web management.
Page 5 If the PT Internet Camera’s default IP Address (192.168.0.20) is already used by another device, the other device must be turned OFF until the Network Camera is allocated a new IP Address during configuration. Or you may execute IP Finder to discover PT Camera’s IP address. Before starting installation, Please ensure that: Procedures of IP finder utility Please find the IP Finder in the Utility folder on user s manual CD...