AEG FAVORIT 34030VI User Manual page 15

After the checks are completed, activate
the appliance. The programme contin-
ues from the point of interruption.
If the problem occurs again, contact the
Service.
9.1 The washing results and drying results are not satisfactory
Problem
The dishes are not
clean.
Limescale particles
on the dishes.
Whitish streaks and
stains or bluish lay-
ers on glasses and
dishes.
Possible cause
The filters are clogged.
The filters are not correctly
assembled and installed.
The spray arms are clog-
ged.
The programme was not
applicable for the type of
load and soil.
Incorrect position of the Incorrect position of the Incorrect position of the
items in the baskets. Water items in the baskets. Water items in the baskets. Water
could not wash all items. could not wash all items. could not wash all items.
The spray arms could not The spray arms could not The spray arms could not
turn freely. turn freely. turn freely.
The quantity of detergent The quantity of detergent The quantity of detergent
was not sufficient. was not sufficient. was not sufficient.
There was no detergent in
the detergent dispenser.
The salt container is emp-
ty.
The set level of the water
softener is incorrect.
The cap of the salt contain-
er is loose.
The released quantity of
rinse aid is too much.
If other alarm codes show, contact the
Service.
Possible solution
Clean the filters.
Make sure that the filters
are correctly assembled and
installed.
Remove remaining soil with
a thin pointed object. a thin pointed object. a thin pointed object.
Make sure that the pro- Make sure that the pro- Make sure that the pro-
gramme is applicable for gramme is applicable for gramme is applicable for
the type of load and soil. the type of load and soil. the type of load and soil.
Make sure that the position Make sure that the position Make sure that the position
of the items in the baskets is
correct and that the water
can easily wash all items.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
Make sure that you add the
correct quantity of deter-
gent in the dispenser be-
fore you start a programme.
Make sure that you add de-
tergent in the dispenser be-
fore you start a programme.
Make sure that there is dish-
washer salt in the salt con-
tainer.
Make sure that the set level
of the water softener agrees
with the water hardness in
your area.
Tighten the cap.
Decrease the released
quantity of rinse aid .
ENGLISH
15