Service Note; Disk Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) - Sony RDR-GX300 Service Manual

QQ
3 7 63 1515 0

1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

1. Remove the upper case.
2. Remove the RD-50 board, RD bracket.
3. Insert the stiff wire in the hole and eject the tray.
Tray
TE
L 13942296513
NOTES DURING THE FORCED EJECTION
1. If the forced ejection is executed while a blank disc media (DVD±RW, ±R) exists on the tray
• Insert a DVD-ROM (DVD test disc, DVD software available on the market, or the like) in the tray and then close the tray.
Note1: If you close the tray while it is empty, ejection of the tray becomes impossible.
Note2: If you close the tray with a CD disc inserted in it, the CD can be ejected. However, if you close the tray while it is empty, there can be a case that
ejection of the tray becomes impossible.
Note3: Even if you replace the DVD drive unit while the tray remains under the state as described above, the situation cannot be improved.
2. If the tray cannot be ejected while the disc is not inserted
• Execute the forced ejection.
• Insert a DVD-ROM (DVD test disc, DVD software available on the market, or the like) on the tray and try to close the tray.
(There are cases that it recovers the trouble.)
3. Contents of forcedly ejected blank disc media (DVD±RW, ±R) can be damaged. (There can be a case that initialization is also impossible.)
www
.
http://www.xiaoyu163.com
Fig. 1
x ao u163
y
i
http://www.xiaoyu163.com

SERVICE NOTE

2 9
8
The stiff wire
Q Q
3 6 7 1 3 1 5
co
.
— 5 —
9 4 2 8
The hole
Fig. 2
0 5 8 2 9 9 4 2 8
m
9 9
9 9