Faber Oscar Installation Manual page 3

L

Should repairs or reconditioning be needed, please, contact your dealer in a timely manner
with the accurate specification of the article and serial number. Only original Wamsler parts
may be used.

As the air needed for burning is drawn from the room where the fireplace is located, ensure
that sufficient air supply is received via the gaps by the windows and external doors. Make sure
that 4 m3 of air should be provided to each kW of rated performance. For this fireplace, it
means that the room has to be at least 32 m in volume. If the room is smaller, sufficient air
supply can be secured by opening air connections to other rooms with air openings (at least 150
cm2).

Ensure to keep proper lateral and rear distances from combustible parts and materials. The
associated values are specified in these user instructions or the model plate.

The fireplace may not be modified.

The connection of the fireplace to the chimney is not permissible if the effective height of the
chimney is less than 4 m, or 5 m with multiple loading. To the chimney that the fireplace uses,
a maximum of two other fireplaces, ovens may be connected.

In the event of any chimney fire, immediately close all the openings of the equipment, and
call the fire service. Never try to extinguish the fire with water. Thereafter, always have the
chimney inspected by an expert.
Usage
1.1 Structure of the equipment
Data badge
Outside air intake
3 < < < <