Table of Contents
Advertisement
Speakers (Balance/Fade): Touch the L (left) or R (right)
screen buttons to adjust the balance between the right
and left speakers. Touch the Front or Rear screen
buttons to adjust the fade between the front and rear
speakers.
Speed Compensated Volume (SCV): With SCV, the
audio system will adjust automatically to make up for road
and wind noise as you drive, by increasing the volume as
vehicle speed increases. Touch the down arrow button
to access the second page of the Audio menu. Set the
volume at the desired level, then select Low, Med, or
High. The volume level should always sound the same
to you as you drive. To turn SCV off, touch the Off screen
button.
EQ (Equalizer): Use the screen buttons labeled EQ1
through EQ5 to choose preset bass, midrange, and
treble equalization settings. The Custom screen button
allows you to choose and set the equalization levels.
To set a custom equalization setting, adjust each setting
to the desired level, then touch the Custom screen
button until you hear a beep.
After adjustments are made, press the BAND hard key to
go back to the preset station menu. Now that you have
preset the station and the EQ setting, you can assign the
EQ to the preset station. To do this, touch the desired
preset station screen button until you hear a beep. The
EQ setting will now be assigned to that station unless you
decide to change it.
If you were at the CD screen before setting an EQ and
you press the CD hard key, you will be returned to the CD
screen, and the EQ will be set to that screen until you
change it.
See "Rear Seat Audio (RSA)", "Theft-Deterrent Feature",
"Audio Steering Wheel Controls", "Radio Reception",
and the antenna information in the Index of your
vehicle's owner manual for more information.
3-5
Advertisement
Table of Contents
