Using The Navigation System - Chevrolet tahoe 2006 Manual

Features and Controls

Using the Navigation System

This section includes the basic information to operate
the navigation system.
The main navigation menu displays a number of options
which offer information on a variety of topics. See
Navigation Menu on page 2-7 for more information.
Use the hard keys located on the navigation system
along with the available touch-sensitive screen buttons
on the navigation screen to operate the system.
Once the vehicle is moving, various functions will be
disabled to reduce driver distractions.
Hard Keys
The following hard keys are located to the left of the
navigation screen:
P (Power/Volume Knob): Press the power/volume
knob to turn the audio and navigation system on and off.
Turn the knob to increase or decrease the volume to
the audio system.
NAV RPT (Navigation Repeat): Press the NAV RPT
key to repeat the current voice guidance navigation
prompt.
2-2
NAV (Navigation): If you are in a menu and are not on
the map screen, press the NAV key to view the map
showing your vehicle's current position.
If a route has not been planned, press this key to
display the map screen and the following information:
•
North or Heading Up symbol
•
Time
•
Map scale
If a route has been planned, press this key to display
the map screen and the following information:
•
Number of miles/kilometers between current vehicle
position and the destination. See "Route Overview
Menu" under Destination on page 2-17 for more
information.
•
Estimated travel time to the destination. See "Route
Overview Menu" under Destination on page 2-17 for
more information.
•
Highlighted route or turn-by-turn instructions. See
"Map Appearance" under Navigation Menu on
page 2-7 for more information.
You will find more information on each feature found on
a map screen later in this manual.