Inserting Two Size Aa (R6) Batteries Into The Remote; Setting The Time; Saving The Power In Standby Mode - Sony LBT-GV8 Operating Instructions Manual

Inserting two size AA (R6)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Using the remote
You can control Sony TVs using the buttons
below.
TV/
VIDEO
By pressing You can
TV ?/1
Turn on or off the TV
TV/VIDEO Select the input source for the TV
TV VOL +/– Adjust the volume of the TV
TV CH +/– Change the channel of the TV
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
8

Setting the time

1
2
Press c/CLOCK SET.
When you set the time for the first time,
skip to step 5.
3
Press v/V repeatedly to select "SET
CLOCK."
4
Press ENTER/NEXT.
5
Press v/V repeatedly to set the hour.
6
Press ENTER/NEXT.
The minute indication flashes.
7
Press v/V repeatedly to set the minute.
8
Press ENTER/NEXT.
The clock starts working.
Tip
If you've made a mistake or want to change the time,
start over from step 2.
Note
TV ?/1
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
TV VOL +/–
TV CH +/–
Saving the power in
standby mode
Press POWER SAVE/DEMO (STANDBY)
when the power is off. Every time you
press the button, the system switches as
follows:
Power Saving Mode y Demonstration
The system is turned on/off by pressing ?/1.
Tips
• The ?/1 indicator lights up even in the Power
Saving Mode.
• The timer works in the Power Saving Mode.
• Everytime you press DISPLAY when the power is
off, the display changes as follows:
Demonstration y Clock
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press POWER SAVE/DEMO (STANDBY) to
show the demonstration.
Turn on the system.