Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for OCZ Deneva 2
Summary of Contents for OCZ Deneva 2
- Page 1 Deneva 2 User Guide...
-
Page 2: Table Of Contents
Install the operating system on the Deneva 2 ....... . . -
Page 3: Welcome
OCZ Deneva 2 features a SATA 6Gbps interface. You can use the Deneva 2 as a boot device or as a storage device. This guide contains instructions for both uses. The instructions assume that you are an experienced IT administrator and have access to the full user information for your systems. -
Page 4: Installation As A Boot Device
Next. lf the Deneva 2 is not listed, install the driver from step 1: click Load Driver and load it from the CD or memory stick. Once the driver is loaded, the Deneva 2 is listed. Select it and click Next. -
Page 5: Installation As A Storage Device
If the motherboard is not SATA compatible, install the SATA HBA card into the system. For full instructions, consult the SATA HBA card user guide. Connect one end of the SATA cable to the Deneva 2 and the other end to the SATA connector on the SATA compatible motherboard or SATA HBA card. -
Page 6: Prolonging The Life Of Your Ssd
Prolonging the Life of Your SSD To prolong the life of your Deneva 2, you can update the Deneva 2 firmware. To obtain the latest firmware updating tools go to http://ocz.com/enterprise/download/firmware. To update the firmware using a GUI interface, download the SSD Toolbox. To update using a command line interface, download the CLOUT utility. -
Page 7: Limited Warranty
Duration of warranty The OCZ Deneva 2 is covered by this warranty for 3 years from the date of purchase. Proof of purchase, including the date of purchase, is required to collect on the warranty. OCZ will inspect the product and decide whether to repair or replace it.