Advertisement
Quick Links
1.
Locate the 4-pin molex power connector
from your power supply.
3.
Locate an x8 or x16 PCI-Express slot and
carefully seat the drive. Be sure you have
consulted the motherboard compatibility
guidelines before installing the Z-Drive.
The motherboard compatibility guideline
is available online at
www.ocztechnology.com.
4.
To set the Z-Drive as your primary boot device, you must first
define in the BIOS. It will appear as a SCSI "LUN0 LSI LOGIC"
drive.
If you are using your Z-Drive in a pre-Vista Service Pack 2, you may need to install the appropriate
drivers. Drivers are available online at www.ocztechnology.com
Z -D R I VE QU IC K S TART G U ID E
2.
Plug the power connector into your
Z-Drive
Advertisement
