Table of Contents
Advertisement
Contacts
3 Set this option to Show All.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information is
optional. You may enter the information in any order
by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
To cancel a Contacts entry at any time press, e to
return to the idle screen.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -or-
From the Contacts list, press m. Select New.
2 If you want to assign a name to the entry:
Select Name.
Enter the name. See "Entering Text" on page 42.
When you are finished, press O.
Tip: Press A under Brwse to select a name
already in Contacts.
3 If you want to assign a ring tone to the name:
32
Select Ringer.
Select the ring to you want to assign.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5 To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
Enter the number or address. For phone numbers,
use the 10-digit format. For email addresses, see
"Entering Text" on page 42.
Tip: Press A under Brwse to select a number or
address from Contacts, the recent calls list, or
Memo.
When you are finished, press O.
6 If you want to assign more options to the number,
select [Options]. See "Assigning Options" on page
33.
7 If you want to add more numbers or addresses to
the entry:
Scroll past the information you already entered.
Advertisement
Table of Contents
