Table of Contents
Advertisement
Getting Started
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge per
day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.
Activating your Mike Account
Before you can begin using your i833 handset, you
need to activate your Subscriber Identity Module
(SIM) card on The Mike Network. Your SIM card
holds the information required to enable your handset
to connect to The Mike Network. It also stores your
user information, language preference and contact
list entries.
• If you purchased your handset through an
Authorized Mike Network Dealer, your SIM should
already be active.
• If you purchased your handset at another location,
follow the "Getting Activated" instructions in the
Mike Services User's Guide.
Powering On and Off
The first time you power your handset on, screen
may appear asking you to update your browser
information. This means you must enable security.
6
To power your handset on:
1 Open the flip.
2 Press p.
Note: Pressing p for more than 5 seconds turns
on Airplane mode. See "Airplane Mode —
Temporarily Turning Off Calls" on page 82.
To power your handset off:
1 Open the flip.
2 Press and hold p.
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See "Entering the PIN" on page 12.
Press A under Ok.
Note: When you receive your handset, the SIM
PIN is 0000. Change your PIN to prevent
fraudulent use of the SIM card (see
"Changing the PIN" on page 13).
Advertisement
Table of Contents
