Selecting The Flash Mode - Ricoh WG-5 GPS Start Manual

• Some functions may not be available or may not function fully depending
on the selected shooting mode.
• The 3 button function varies depending on the screen. Refer to the
guide indications.
MENU
MENU
MENU

Selecting the Flash Mode

, Auto
Flash Off
a
Flash On
b
Auto + Red-eye
c
Flash On +
d
Red-eye
• The available modes differ depending on the selected shooting mode,
focus mode or drive mode.
• If you use the Face Detection function when , is selected, the flash mode
is automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause
irregularities in the image due to the light distribution.
1
Press the four-way controller (4)
in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
Exit Exits the menu and returns to the original screen.
Returns to the previous screen with the current settings.
Cancel Cancels the current selection, exits the menu and returns
to the previous screen.
The flash discharges automatically depending on the light
conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is
prohibited.
The flash discharges for each shot regardless of the
brightness.
This mode reduces the red-eye phenomenon caused by the
light from the flash being reflected in the subject's eyes. The
flash discharges automatically.
This mode reduces the red-eye phenomenon caused by the
light from the flash being reflected in the subject's eyes. The
flash discharges regardless of the light conditions.
Flash Mode Flash Mode Flash Mode
Auto Auto Auto
MENU MENU MENU Cancel Cancel Cancel OK OK OK OK OK OK
41