Local Area Code; Registration (Link Handset ) - GE 25880 User Manual

2. Use the caller ID (rev or skip) button to select the current day.
3. Press program/flash until SETTIME shows on the display. 12:00 AM is the
default setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the
second digit of the hour, the first digit of the minute, and the second digit
of the minute.
5. Use the caller ID (rev or skip) button to scroll to AM or PM.
6. Press program/flash again to store your selection.

Local Area Code

NOTE: This setting may be made with the base or the cordless handset.
1. Press the program/flash button until SET AREA CODE - - - or AREA CODE
- - - shows in the display. - - - is the default setting.
2. Use the cordless handset or base number pad to enter your three digit
area code.
3. Press program/flash again to store your selection.
NOTE: To restore the default setting to - - -, press and release delete button
on base or del/chan button on handset when SET AREA CODE or AREA CODE
shows in the display.
Registration (Link Cordless Handset)
NOTE: If a handset become de-registered or inoperative, it may be necessary
to register the cordless handset(s) again.
Registration links the base to a cordless handset. Once a handset is
registered it can use the base's phone connection. A cordless handset will
not operate until it is registered to the base. During the registration process,
keep the handset near the base.
1. Press the program/flash button on the base until LINK HANDSET ? shows
in the display. 2NO is the default setting.
2. Press the 1 number key or press the caller ID (rev or skip) button on the
base to scroll to 1YES.
15