Pause Digit Entry - Motorola i500plus User Manual

Enter Phone Number displays. Enter person's area code and
4
phone number and pressounder "Store".
Remember to add plus and pause entries if desired. See "Pause
Digit Entry" on page 17 and "Plus Dialing" on page 27.
The name and Spd# = displays. The system automatically
5
assigns a speed dial number, which you can change by entering a
new number. Pressounder "Store".
Enter PrvtID displays. Enter the person's Direct Connect pri-
6
vate ID. Pressounder "Store".
Repeat steps 2 through 6 to add additional names/numbers.
7
Pressounder "Exit" when you have finished.
8
NOTE: To see the name with Caller ID, enter the caller's 10-digit
phone number (703-555-9999) in your phone list (see "Caller
ID" on page 50 ).

Pause Digit Entry

When storing a number, you can program your phone so that it will not
only dial a number but also pause and enter another series of numbers
such as a personal identification number (PIN) or password. This
feature is particularly useful for automated services such as voice mail
and banking systems.
Here's how it works! Let's say you have a company voice mail account
that you frequently check while on travel. And, to access that account
you must do the following:
• Dial your work number;
• Press # while the voice mail greeting is being played; and
• Enter your PIN to access your messages.
You can program your i500plus phone to enter all of the above
information for you. All you have to do is separate each entry with a
pause. If you were to program your phone to automatically input the
above information, the stored data would look like this
17035551234P#P1234. In this example, the first eleven digits represent
the number that must be dialed to access your voice mail. The P
represents a 3 second pause. The # interrupts your greeting. The second
P represents another 3 second pause. The last four digits represent your
PIN.
Phone Based
17