Making Tty Calls - Motorola i205 User Manual

To use these services, you must install the iDEN
Wireless Data Services software (available
separately) and subscribe to a Nextel Wireless Web
For more information on setting up your
access plan.
computer and your i205 phone for packet and circuit
data call s, refer to the Nextel Online
on www.nextel.com.

Making TTY Calls

To use your phone to make phone calls using a
teletypewriter (TTY) device:
1 Connect one end of a 2.5mm cable into the audio
jack on your phone. Connect the other end of the
cable to your TTY device.
2 Make sure that your phone's TTY feature is on
and select the TTY mode you want to use.
3 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone's display:
N Phone call is active.
O Phone call is on hold.
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
Turning On the TTY Feature
Your phone's TTY feature must be on if you want to
make TTY calls, set the TTY mode, or change the
TTY baud rate. To make sure the TTY feature is on:
User's Guide
®
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
• VCO (Voice-Carry-Over) — You speak into your
• HCO (Hearing-Carry-Over) — You type text on
To change mode while not in a call:
1 From the main menu, select Settings > Phone
2 Press A under Change.
3 Scroll to the TTY mode you want.
4 Press A under Select.
When you make a TTY call, the call begins in the
TTY mode you last selected.
From the main menu, select Settings > Phone
Calls > TTY. This field must say On.
device.
phone and read text replies on your TTY device.
your TTY device and listen to voice replies on
your phone speaker.
Calls > TTY > Type.
Making TTY Calls
79