Ipod Operation - Marine Audio MA200 Nstallation And Operations Manual

iPOD OPERATION
®
This unit is equipped with an iPod ready function that will allow you to control your
iPod (if compatible) using the control panel buttons. The following iPod versions
are supported:
• iPod Nano – 6G, 7G
•
iPod Classic
• iPod Touch – 4G, 5G
• iPhone – 4, 4S, 5, 5C, 5S
NOTE: Earlier model iPods may not be supported because they do not
implement the USB control protocol. The iPod Shuffle is not supported
because it does not utilize the 30-pin Apple iPod Connector. These
unsupported iPod models may be connected to the radio using one of the
Auxiliary Inputs.
Accessing iPod Mode
Connect a supported iPod or iPhone to the USB connector. The iPod icon
illuminates in the bottom right left corner of the LCD whenever an iPod or iPhone
is attached to the USB connector. Music playback begins automatically.
To enter iPod mode from any other source, press the MODE button (4) until "USB"
appears on the display. If the user connects an iPod containing no songs, the
radio will display a message stating "No Songs" when it enters iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is connected to the USB
connector, as long as the vehicle ignition is turned on. You can turn the iPod off by
disconnecting it or by turning the ignition off. When the ignition is turned off, the
iPod will pause and then enter sleep mode after 2 minutes. While the iPod is
connected, the power cannot be turned on or off from the iPod itself.
NOTE:
The iPod will continuously recharge when connected to the unit, as long as
the vehicle ignition is turned on.
Controlling Playback
Selecting Tracks
During playback, press the ►►button (14) to play the next track in the current
category. Press the ◄◄ button (13) twice to play the previous track. After the first
2 seconds of the playback. Press and hold the ◄◄ / ►► buttons to fast
reverse/forward the song.
Pausing Playback
During playback, press the 1/|| button (5) to pause playback. "Pause" will appear
on the LCD. Press 1/|| button again to resume playback.
Repeat Play
During playback, press the 2 button (6) to repeat the current song. "REPEAT" will
appear on the LCD. Press 2 again to stop repeat playback.
Random Play
During playback, press the 4 button (8) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing.
"SHUFF" will appear on the LCD. Press 4 again to stop random playback.
NOTE: If you press and hold the ◄◄ or ►► button to change the current
song to the previous/next song, you will exit fast reverse/forward mode.
Alternate Display Information
Press the DISP button (12) to change the display information in the following order:
ARTIST >TITLE > FOLDER > FILE NAME > ARTIST.
Search Mode
Press and hold the BAND/SEARCH button (16) to enter iPod search mode and
choose from the following search criteria: Playlist, Artist, Album, Song, Genre or
Composer (consecutively). When search mode is selected, press the INFO
ENTER button (18) to confirm selection. Use the VOL +/- button (2) to navigate
through various list selections. Press INFO/ENTER (18) to make your final
selection.
10
MA200