Advertisement
HOW TO USE
NOTICE: Do not process raw meat, cheese, coffee beans, or whole squares of chocolate in this product, as product
damage could result. Do not operate more than 30 s
1. Cut the food into small pieces, as needed.
NOTE: Hard vegetables, such as raw carrots, may require splitting and/or quartering in order to allow smooth operation
and movement of the Blades.
2. Place the food into the Container Bowl.
2. Place the food into the Container Bowl.
3.
4. Plug the product into a standard 110-120 volt AC electrical outlet.
5. Press the On/Pulse Button to begin processing the food.
6. To stop processing, release the On/Pulse Button.
7. Wait until the Blades and Metal Shaft have completely stopped before removing the Cover or any contents.
8. Unplug the product from the electrical outlet when it is not in use or is left unattended.
WARNING: Overfilling the Container Bowl could cause spillage, resulting in serious burns and/or property/product
damage.
Tips:
To chop meat, cut the fresh meat into 15-20mm chunks before processing them in the container bowl, and the
biggest is 150g.
To make bread crumbs, break the bread into pieces before placing them into the food processor. Do not fill food
past the maximum capacity of 1½ cups
To chop vegetables (e.g., carrot, celery, mushroom, onion, green peppers): cut the vegetables into 20-25mm
chunks before processing them in the container bowl. Do not fill food past the maximum capacity of 1½ cups
CLEANING AND MAINTENANCE
WARNING: To avoid the risk of electric shock, always ensure the product is unplugged from the electrical outlet before
assembling, disassembling, relocating, servicing, or cleaning it.
WARNING: Handle the Blades with care as they are extremely sharp. Use caution when attaching, detaching, cleaning,
or storing the Blades.
Always clean the product immediately after each use.
Wash the Cover, Container Bowl, and the Blades in warm, soapy water; rinse and let dry.
Clean the Base by wiping it with a damp cloth. To avoid product damage, do not immerse the Base into water or
other liquids.
To avoid damage to the product, do not use abrasive cleaners or scouring pads to clean the product parts.
Store the product in a cool, dry place.
Store the product in a cool, dry place.
Advertisement
