Advertisement
PARTS DESCRIPTION
BEFORE USE
1. Remove product parts from packaging and disassemble. To remove the Container Bowl from the Base, turn
Container Bowl counterclockwise.
NOTE: Container Bowl may be slightly difficult to remove when product is new. To aid removal, place the Base onto
its side on a soft surface and then turn Container Bowl firmly to remove.
2. Thoroughly wash the Cover, the Container Bowl, and the Blades in warm, soapy water. Rinse and let dry.
2. Thoroughly wash the Cover, the Container Bowl, and the Blades in warm, soapy water. Rinse and let dry.
TO ASSEMBLE
WARNING: Ensure the product is unplugged from the electrical outlet before assembling it. Handle the Blades with
care as they are extremely sharp. Use caution when attaching, detaching, cleaning, or storing the Blades.
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a flat, level, stable surface.
3. Insert the Container Bowl over the Metal Shaft and turn the Container Bowl clockwise until the Safety Latches of the
Container Bowl lock to the Base (preventing the Container Bowl from detaching).
4. Attach the Blades by holding the plastic shaft end (end opposite of the
Blades) and inserting the Blade shaft over the center column of the
Container Bowl until secure.
5. Attach the Cover after inserting the food into the Container Bowl.
IMPORTANT NOTE: The Cover must be securely locked into its position
before the food processor will operate. When properly locked, the arrow
inscribed on the Cover handle must align with the arrow inscribed on the
Base (near the On/Pulse Button)
Advertisement
