Table of Contents
Advertisement
Quick Links
CyberResearch, Inc.
CPU Cards
CPBF PMX-233
Half-Size All-in-One™ CPU Card
233MHz Pentium MMX • VGA/LCD LAN
• ISA Connector • DiskOnChip
USER'S MANUAL • REVISION 1.5 (09/01)
No part of this manual may be reproduced without permission.
CyberResearch, Inc.
www.cyberresearch.com
25 Business Park Drive, Branford, CT 06405 USA
203-483-8815 (9am to 5pm EST) FAX: 203-483-9024
©1997 CBI
Advertisement
Table of Contents
Related Manuals for CyberResearch CPBF PMX-233
Summary of Contents for CyberResearch CPBF PMX-233
- Page 1 CyberResearch, Inc. CPU Cards CPBF PMX-233 Half-Size All-in-One™ CPU Card 233MHz Pentium MMX • VGA/LCD LAN • ISA Connector • DiskOnChip USER’S MANUAL • REVISION 1.5 (09/01) No part of this manual may be reproduced without permission. CyberResearch, Inc. www.cyberresearch.com...
- Page 3 CyberResearch, Inc. In no event will CyberResearch, Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of or inability to use the product or documentation, even if advised of the possibility of such damages.
-
Page 5: Table Of Contents
Contents CPBF PMX-233 ..............................1 GENERAL INFORMATION..................3 1.1 M ....................5 AJOR EATURES 1.2 S ......................6 PECIFICATIONS 1.3 D ....................7 ELIVERY ACKAGE HARDWARE INSTALLATION................... 8 2.1 C ................8 AUTION OF TATIC LECTRICITY 2.2 C ........9 AUTION ON NPACKING AND... - Page 6 AWARD BIOS SETUP....................32 4.1 M ......................33 4.2 S CMOS S ..................34 TANDARD ETUP 4.3 BIOS F ..................35 EATURES ETUP 4.4 C ..................37 HIPSET EATURES ETUP 4.5 I ..................38 NTEGRATED ERIPHERALS 4.6 P ................40 OWER ANAGEMENT ETUP SOFTWARE UTILITIES ....................41 5.1 V WIN95&98 ............40 RIVER NSTALL...
-
Page 7: General Information
The VGA supports up to 1280x1024 @ 256 colors resolution. The CPBF PMX-233 support SDRAM memory in a one DIMM socket. This gives you the flexibility of configuring your system from 8 to 256MB DRAM by using the most economical DIMM memory modules for its on board system SDRAM. -
Page 9: Major Features
1.1 Major Features ® ® 75~500MHz CPU for Intel Pentium , Tillamook, AMD K5/K6, Cyrix 6x86 ALi M1541, M1543 chipsets One DIMM socket provides up to 256MB Fast PCI DMA33/66 controller support two IDE disk drives 100MHz system clock support Four RS -232 serial ports, include 16C550 UART with 16-byte FIFO One enhanc ed bi-directional parallel port supports SPP/ECP/EPP On board PS/2 Keyboard and PS/2 Mouse connector... -
Page 10: Specifications
1.2 Specifications ® ® • CPU: 75~500MHz CPU for Intel Pentium , Tillmook, AMD K5/K6, Cyrix 6x86 • Bus Interface: ISA Bus • Memory: One DIMM socket provides up to 256MB • Cache Memory: 512KB pipeline burst • Chipset: ALi M1541/M1543 •... -
Page 11: Delivery Package
• Operating Temperature: °0~60°C • Board Size 7.3”(L) x 4.8”(W) 1.3 Delivery Package The delivery package of CPBF PMX-233 includes all following items: • CPBF PMX-233 Industrial Single Board • One Printer • One IDE Port Flat Cable • One FDD Port Flat Cable •... -
Page 12: Hardware Installation
Then follow the jumpers switch setting, the watchdog, and the DiskOnChip address sections, etc. 2.1 Caution of Static Electricity The CPBF PMX-233 has been well package with an anti-static bag in protect its sensitive computer components and circuitry from the damage of static electric discharge. -
Page 13: Caution On Unpacking And Before Installation
CPBF PMX-233 from electrical discharge. Referring to section 1.3, please check the delivery package again with following steps: 1. Unpack the CPBF PMX-233, retaining all of the packing material, manual and diskette, etc. 2. If any of the components are losy or drop from the board, DO NOT INSTALL THE BOARD. -
Page 14: Cpbf Pmx-233' S Layout
2.3 CPBF PMX-233 Layout... -
Page 15: Quick Listing Of Jumpers
2.4 Quick Listing of Jumpers JP1 ( 1 -6 ) CPU‘s Core / Bus Clock-Ratio setting JP1 (7-16) CPU‘s Vcore Voltage level selection setting ATX power switch Hard Drive Active LED connector CPU Temperature Alarm Enabled/Disabled 69000 Active Select. Panel Voltage Select CPU clock in Select DiskOnChip™... -
Page 16: Quick Listing Of Connectors
2.5 Quick Listing of Connectors ATX Power Connector 5-pin Keyboard Connector IDE Connector Speaker Connector KEYLOCK Connec tor RESET IR Connector FDD Connector PC/104 64-pin Connector CN10 PC/104 40-pin Connector CN11 Parallel Port CN12 USB Port CN13 COM3: Connector (HEADER 5X2) CN14 COM4: Connector (HEADER 5X2) CN15 COM2: Connector (HEADER 5X2) CN16 COM1: Connector (HEADER 5X2) -
Page 17: Jumper Setting Description
2.6 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over one or no pin(s) between pins. The below figure 2.2 shows the examples of different jumper pin-set setting as ON or OFF in this manual. -
Page 18: Vga Controller
JP5: VGA Controller *1-2 2.8 DiskOnChip Address Setting The CPBF PMX-233 provides an U8 socket to install the DiskOnChip module. A JP8 may select the starting memory address of the DiskOnChip (D.O.C.) for avoid the mapping area with any other memory devices. If you have other memory devices in the system, please set both at different memory address mapping. -
Page 19: Setting The Cpu
2.9 Setting the CPU The CPBF PMX-233 provides all possibility in jumper setting for types of CPU with JP1 (7-16) for CPU Vcore Voltage, JP7 (1-8) for internal Host Bus Clock Rate and JP1 (1-6) for CPU Clock-in Multiplex Weighted Value setting as following. -
Page 20: Watchdog Timer
• JP9: Dual/Single Voltage Select JP19 DESCRIPTION Dual Voltage Single Voltage 2.10 Watchdog Timer There are three access cycles of Watchdog Timer: Enable, Refresh and Disable. The Enable cycle should proceed by READ PORT 443H. The Disable cycle should proceed by READ PORT 045H. A continue Enable cycle after a first Enable cycle means Refresh. - Page 21 • JP8(5-10): WDT Time - Out Period PERIOD 9-10 *1 sec 2 sec 10 sec 20 sec 110 sec 220 sec The Watchdog timer is disabled after the system Power On. The watchdog timer can be enabled by an Enable cycle by reading the control port (443H), a Refresh cycle by reading the control port (443H) and a Disable cycle by reading the Watchdog timer disable control port (045H).
-
Page 22: System Memory Sdram
; get back AX, DX WT_DISABLE PUSH PUSH DX,WDT_DIS ; disable the watchdog timer AL,DX ; get back AX, DX 2.11 System Memory SDRAM The CPBF PMX-233 provides SDRAM memory on board with one DIMM socket for maximum 256MB capacity. -
Page 24: Connection
Chapter-3 Connection This chapter gives all necessary information for the peripheral's connections, switches and indicators. 3.1 VGA Connectors The HCPBF PMX-233 provides one external connector for the VGA monitor connection. • CN18: 15-pin CRT Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION GREEN BLUE... -
Page 25: Serial Ports Connectors
3.2 Serial Ports Connectors TheCPBF PMX-233 offers four high-speed NSIGC550 compatible UARTS with Read/ Receive 16-byte FIFO serial ports with two DB-9 external connectors and four internal 10-pin header connectors. • CN13,14, 15, 16: 10-Pin Serial Port Header PIN NO. DESCRIPTION PIN NO. -
Page 26: Keyboard Connector
3.3 Keyboard Connector The CPBF PMX-233 offers two possibilities for keyboard connections to an external PS/2 keyboard at CN19 or an internal 5-pin header at CN2. • CN19: PS/2 6-pin Mini-DIN Keyboard Connector PIN NO. DESCRIPTION Keyboard data Keyboard clock •... -
Page 27: Ps/2 Mouse 6- Pin Mini Din Connector
3.4 PS/2 Mini-DIN 6-pin Mouse Connector The CPBF PMX-233 provides an external PS/2 mouse connector at CN20 with following pin information: • CN20: PS/2 6-pin Mini-DIN Mouse Connector PIN NO. DESCRIPTION Data... -
Page 28: Pci E-Ide Drive Connector
3.5 PCI E-IDE Drive Connector One standard 40-pin header daisy-chain driver connector provides as CN3 with following pin assignment. Total two IDE (Integrated Device Electronics) drivers may connect. • CN3: IDE Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET GROUND DATA 7 DATA 8 DATA 6... -
Page 29: Parallel Port Connector
3.6 Parallel Port Connector A standard 26-pin flat cable driver connector provides as CN11 with following pin assignment for connection to a parallel printer: • CN11: Parallel Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION STROBE DATA 0 DATA 1 DATA 2 DATA 3 DATA 4... -
Page 30: Atx Power Connector
3.8 ATX Power Connector The CPBF PMX-233 reserved a CN1 for ATX Power funtion CN1 that can control the 5-pin ATX via the extension cable from the backplane. 3.9 The Floppy Disk Drive Connector A standard 34-pin header daisy-chain driver connector provides as CN8 with following pin assignment. -
Page 31: Connectors Of The O N Board Sound Adapter
3.10 On-Board Sound Adapter Connectors ® The HCPBF PMX-233 has an on board ESS Solo1 3D sound interface. The following are the connectors of LINE IN, AUXB and MIC/SPEAKER connectors. The LINE IN and AUXB connectors are for audio sound input. The LINE IN provides for 4pin connection, and AUXB provides for 3-pin connection. -
Page 32: Fast Ethernet Connector
3.11 Fast Ethernet Connector The Fast Ethernet controller provides with 32-bit performance, PCI-bus master capability, and full compliance with IEEE 802.3 10/100Based-T specifications. For 10/100Base-T operation, please connect the network connection by plugging one end of the cable into the RJ-45 of the CN17 Connector. •... - Page 33 • CN9&CN10: PC/104 Expansion Bus (CN9 = 64-pin female connector; CN10 = 40-pin female connector.) CN10 CN10 Row A Row B Row D Row C 1 IOCHECK* 33 0V 1 0V 21 0V 2 SD7 34 RESETDRV 2 MEMCS16* 22 SBHE* 3 SD6 35 +5V 3 IOSC16*...
-
Page 34: Flat-Panel Connector
3.13 Flat-Panel Connector The CPBF PMX-233 provides a 50-pin 2.0 mm pitch header connector (JP12) for 3.3V Flat panel connection with following pin-assignment. +12V +12V +3V PVcc ENAVdd FPVee SHFCLK ENABKL • JP6: Panel Power Selection DESCRIPTION 3.3V Power 5V Power... -
Page 35: Usb Ports Connector
3.14 USB Ports Connector The CPBF PMX-233 provides one 8-pin connector for USB-0 & USB-1 ports. Please refer to the following default pin information. • CN12: USB Port Connectors PIN NO. USB-0 PIN NO. USB-1 USB PO- USB P1- USB PO+... -
Page 36: Award Bios Setup
Chapter-4 AWARD BIOS Setup The CPBF PMX-233 uses Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. -
Page 37: Main Menu
4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter>... -
Page 38: Standard Cmos Setup
4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode. -
Page 39: Bios Features Setup
4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. ROM PCI/ISA BIOS (2A5KKD2B) BIOS FEATURES SETUP AWARD SOFTWARE, INC. -
Page 41: Chipset Features Setup
4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. -
Page 42: Integrated Peripherals
4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. - Page 43 Panel# Panel Type 1024*768 Dual Scan STN Color Panel 128*1024 TFT Color Panel 640*480 Dual Scan STN Color Panel 800*600 Dual Scan STN Color Panel 640*480 Sharp TFT Color Panel 640*480 18-bit TFT Color Panel 1024*768 TFT Color Panel 800*600 TFT Color Panel 800*600 TFT Color Panel (Large BIOS ONLY) 800*600 TFT Color Panel (Large BIOS ONLY) 800*600 Dual Scan STN Color Panel (Large BIOS ONLY)
-
Page 44: Power Management Setup
4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. ROM PCI/ISA BIOS (2A5KKD2B) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. -
Page 45: Software Utilities
Chapter -5 Software Utilities This chapter the detailed information of VGA and LAN function. How to install the configuration is also included. Section includes: • VGA DRIVER INSTALLATION • NETWORK DRIVER INSTALLATION... -
Page 46: Vga Driver Install For Win95&98
5.1 VGA DRIVER INSTALL FOR WIN95&98 1. Click Start, then Setting, then Control Panel. Start the Display applet program. 2. Select the setting page, push the advanced properties button. Push the change button in the adapter area. 3. Continue to click “Next”. Select Display a list of all drivers in a specific location, So you can select the drivers you want. -
Page 49: Vga Driver Install For Win Nt4.0
5.2 VGA DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. Click on Display icon to start the Display Properties Window. 2. Click on the Settings tab, and then click on Display Type. In the Change Display Type window, click on “Have Disk”. -
Page 53: Network Driver Install For Win95&98
5.3 NETWORK DRIVER INSTALL FOR WIN98&95 Win98 Windows 98 will detect the network driver automatically. Win95 1. Click Start, then Setting, in the “Setting” select Control panel. Start the network applet program. 2. In the Network window, click “Add.” In the Select Network Component Type, select Adapter then click “Add.”... -
Page 56: Network Driver Install For Win Nt4.0
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. Click on the Network icon to start the Network Window. 2. Click on the Adapters tab, and then click “Add.” In the Select Network Adapter window, click “Have Disk.”...
Need help?
Do you have a question about the CPBF PMX-233 and is the answer not in the manual?
Questions and answers