Remote Control - Samsung HW-J370 User Manual

reMOTe CONTrOL

● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
SOURCe
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the repeat function during music playback from a uSB device.
OFF - RePeAT : Cancels repeat Playback.
TRACK - RePeAT : repeatedly play a track.
ALL - RePeAT : repeatedly play all tracks.
RAnDOM - RePeAT : Plays tracks in random order.
(a track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
SOUnD COnTROL
Press to select TReBLe, BASS, or AUDiO SynC. Then, use the [,]
buttons to adjust the Treble or Bass volume from -6 to +6.
Press and hold the SOUnD COnTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted to a
setting between -6 and +6.
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the SOUnD COnTROL button to sync the audio
with the video. use the [,] buttons to set the audio delay between
0 ms and 300 ms. In uSB mode, TV mode, and BT mode, the audio Sync
function may not available.
AUTO POWeR
Press the AUTO POWeR button. each time the button is pressed, the
selection changes as follows : OFF - POWeR LinK  On - POWeR LinK.
* auto Power Link
Synchronizes the Soundbar to a connected Optical source via the
Optical jack so it turns on automatically when you turn on your TV.
(See page 16)
9
DESCRIPTIONS