Advertisement
4. Insert handlebars in stem making sure to open quick release.
Adjust height and close quick release.
5. Flip bike over on to seat and handlebars. And install pegs if
using as a glider (balance bike). Open quick release, push pin on
pegs in with thumb and insert into frame and release pin. Then
push into locator hole to adjust distance and close quick release.
6 If using as a bike install chain and pedals next. Put chain
around back sprocket and around chain stays and install master
link. First insert link with 2 pins into chain ends to put together,
then install plate over pins and slide lock plate onto pins using
long nose pliers shown in photos and snap into place. If unsure
how to do bring to bike shop.
2
Advertisement
