Table of Contents
Advertisement
EN
When connecting the control unit to the SmartFan unit, a 4-pole 3.50 mm straight plug
must be used. The plug must be wired as shown below. When connecting the plug to the
fan unit holder, the screws should point downwards.
When continuing the cable to a further SmartFan unit, the colours of the input and output
wires in each opening must match each other.
incorrect wiring can cause damage to the fan unit.
Control
Control
Control
The LED Control can be placed at an arbitrary place within the BUS-network. It is possible
to run the cables in row, ring-shaped or also radial.
7
LED Control
Installation and operating instructions -
Advertisement
Table of Contents
