Sony Bravia KLV-40ZX1 Operating Instructions Manual page 41

Screen
Wide Mode
Auto Wide
4:3 Default
Display Area
Horizontal Shift
Vertical Shift
Vertical Size
HDMI Set-up
This is used to set the "Control for HDMI" compatible equipment connected to the HDMI jacks.
Note that the interlock setting must also be made on the connected "Control for HDMI" compatible
equipment side.
Control for HDMI
Auto Devices Off
Auto TV On
Device List Update
HDMI Device List
See "To change the Wide Mode manually" on page 24.
Automatically changes "Wide Mode" according to the input signal. To keep your
setting, select "Off".
Selects the default Wide Mode for use with 4:3 broadcasts.
Wide Zoom
Displays conventional 4:3 broadcasts with an imitation wide
screen effect.
Normal
Displays conventional 4:3 broadcasts in the correct
proportions.
Off Keeps the current "Wide Mode" setting when the channel or
input is changed.
Full Pixel Displays the pictures in their original size if the input sources
are 1080/24p, 1080p or 1080i.
Normal
Displays the pictures in their recommended size.
-1/-2 Enlarges the picture to hide the edges of the picture.
~
• For 1080/24p, 1080p, 1080i and 720p sources, this feature is only available when
"Wide Mode" is set to "Full".
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture when "Wide Mode" is set to "Zoom".
Adjusts the vertical size of the picture when "Wide Mode" is set to "Wide Zoom"
or "Zoom".
This sets whether to interlock the "Control for HDMI" compatible equipment and
the unit. When set to "On", the following menu items can be performed. However,
power consumption in standby mode is higher than usual.
When this is set to "On", the "Control for HDMI" compatible equipment turns off
when you switch the unit to standby mode using the remote.
When this is set to "On" and if the connected HDMI, control compatible
equipment is turned on, the unit automatically turns on, and the displays the HDMI
input from the connected equipment.
Creates or updates the "HDMI Device List". Up to 14 "Control for HDMI"
compatible equipment can be connected, and up to four equipment can be
connected to a single jack. Be sure to update the "HDMI Device List" when you
change the "Control for HDMI" compatible equipment connections or settings.
Select them manually one by one until getting a correct picture for several seconds.
Displays the connected "Control for HDMI" compatible equipment.
41
GB