Sony Bravia KLV-40ZX1 Operating Instructions Manual page 33

Media Receiver Set-up
Auto Start-up
Screen Settings
AV Set-up
You can run the initial set-up that appeared when you first connected the unit
(page 10), and select the country and tune in all available channels again. Even if
you have made the settings when you first connected the unit, you may need to
change the settings after moving house, or to search for newly launched channels.
Wide Mode See "To change the Wide Mode manually" on page 24.
Auto Wide Automatically changes "Wide Mode" according to the input
signal. To keep your setting, select "Off".
4:3 Default Selects the default Wide Mode for use with 4:3 broadcasts.
Wide Zoom
Normal
Off
Display Area
Adjusts the picture display area in 1080i/p source when
"Wide Mode" is set to "Full".
Full Pixel
Normal
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when "Wide
Mode" is set to "Wide Zoom" or "Zoom".
Vertical Size Adjusts the vertical size of the picture when "Wide Mode" is
set to "Wide Zoom" or "Zoom".
Video Labels Assigns a name to any equipment connected to the media
receiver. The name will be displayed briefly on the screen
when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
2
-, DVD/BD,
VCR,
SATELLITE,
CABLE,
RECEIVER,
CAMCORDER
Edit:
Skip
Displays conventional 4:3 broadcasts
with an imitation wide screen effect.
Displays conventional 4:3 broadcasts in
the correct proportions.
Keeps the current "Wide Mode" setting
when the channel or input is changed.
Displays pictures in their original size.
Displays pictures in their recommended
size.
Press F/f to select the desired input source, then press
.
Press F/f to select the desired option below, then press
.
Uses one of the preset labels to assign a
name to connected equipment.
Creates your own label.
1
Press F/f to select the desired letter
or number ("_" for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong
character. Then, press F/f to select
the correct character.
2
Repeat the procedure in step 1 until
the name is completed.
3
Select "OK", then press
Skips an input source that is not
connected to any equipment when you
press F/f to select the input source.
.
33
(Continued)
GB