Dvd Playback; Basic Playback; Stopping Playback And Returning To The Menu Screen (If A Menu Is Available On The Disc) - Matsui PL607 User Manual

1
1-1

DVD Playback

You can power the unit either with the AC adapter or the battery pack.

Basic Playback

1
Slide power switch to the ON position.
2
Press <OPEN> to open the disc cover.
3
Hold the edge of the disc to put it in the center with the printed side up.
Hold the disc without touching its surfaces, position it with the printed title side facing up, align it with the
guides, and place it in its proper position.
4
Close the disc cover.
Close the disc cover and the portable DVD player starts playback if the disc does not have any menus recorded
on it.
If the disc has one or more titles recorded on it, a menu screen will appear on the screen.
<< NOTE: Proceed with steps 5 and 6 when a menu is available on the disc. >>
5
Press
<< NOTE: To select a title, input the number, i.e. 1 for chapter 1, 10 for chapter 10, and etc. >>
6
Press
The player now starts playback the selected item.
Stopping Playback and Returning to The Menu Screen (If a Menu Screen Is Available on
The Disc)
Press <MENU>.
The portable DVD player stops playback, and then displays the menu screen.
After operation
When the portable DVD player is not in use, remove the disc and slide the POWER switch to turn off the
player. Then close the display panel.
<< NOTE >>
The disc continues to rotate while the menu is displayed even after the player has finished playing a
particular disc. When no further selections are to be played, be sure to press the
button to clear the menu screen.
If the disc is placed in upside down (and it is a single sided disc), the player's display will appear "NO
DISC".
For your reference:
< / / / > or the number button(s) to select the preferred title.
<PLAY/SEL.> .
When " " appears while a button is being operated, it means that the corresponding
operation is prohibited by the player.
En 10
<STOP>