Panasonic CF-48 Series Operating Instructions Manual page 27

Press [Restart Computer]. Select "Windows NT
9
Workstation Version 4.00" and press Enter .
Following the display, press
10
Del . Input the password set in step
[OK], then select [Close] at the [Welcome] display.
As the computer starts up, it will be necessary to
input the password set in step
Install Touch Pad driver.
11
(At the [Welcome], select [Next] and follow the on-
screen instructions. When the installation completes,
select [No, I will restart my computer later], and then
select [Finish].)
Install Intel (R) Speed Step (TM).
12
(At the [Welcome], select [Next]. When the installa-
tion completes, select [No, I will restart my computer
later], select [Finish].)
Follow the on-screen instructions and install ESS
13
Allegro1 Utility.
(At the [Welcome] display, select [Next]. Confirm
[Upgrade Drivers] is selected, then select [Next].
When the installation completes, select [No. I will
restart my computer later], then select [Finish].)
Install Phoenix APM 2.0 for Windows NT.
14
When the installation completes, select [Don't Restart
Now].
Install Phoenix Card Executive™ for Windows NT.
15
When the installation completes, select [Restart Now].
The [Begin Logon] display will appear. Perform the
16
operation in step .
10
Select [Next] at the [Card Executive 2.0 for NT Di-
17
agnostics].
Select [Next], then select [Finish].
18
Windows will restart.
The [Begin Logon] display will appear. Perform the
19
operation in step .
10
Double-click the [Internet Explorer] icon to install
20
Internet Explorer.
Select [I accept the agreement], then select [Next].
21
Select [Install Minimal, or customize your browser],
22
then select [Next].
Select [Full] by clicking
23
At the [Restart Computer], select [Finish].
24
Set the correct settings for all items in [Control Panel]-
25
[Regional Settings] and [Date/Time] etc.
Install the Acrobat Reader 4.0. (
®
26
Ctrl + Alt +
and select
6
.
6
, then select [Next].
page 13)
NOTE
Windows NT
About Differences between Factory Condition and
After Reinstallation
The condition after reinstallation differs in the following
points with the factory condition.
During startup, the ATI video driver's [DeskTop Help]
is displayed (remove the check mark for [Show this
screen next time you start Windows]).
The ATI icon is displayed in the task tray (remove the
check mark for [Enable ATI Taskbar Icon] in [Dis-
play Properties] - [Options]).
[Information about your TouchPad] is displayed dur-
ing startup (remove the check mark for [Show this
message the next time Windows starts]).
After the reinstallation, the free space on the hard disk
is taken as the primary partition (delete the free space
in [Start] - [Programs] - [Administrative Tools (Com-
mon)] - [Disk Administrator]).
27