Panasonic CF-48 Series Operating Instructions Manual page 13

Eject Button
Label on the top surface, and
i n s e r t t h e s h u t t e r - s i d e
headfirst.
9
Create Backup Disks for reinstallation
Prepare 2HD floppy disks and make sure they are not in the write-protected state, then
select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen
instructions. Place a label identifying the contents on each disk.
Windows 2000
When [You do not need to make "BACKUP Disk"] is displayed, there is no need to create
a Backup Disk.
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
CAUTION
Store the disks in a safe place. They will enable you to return your computer to
close to the condition at the time of purchase should any problems occur.
When creating disks, do not run any other application program.
When creating disks and the message [Insufficient files to copy] is displayed, click
[OK] and then contact Panasonic Technical Support.
While the disk drive indicator is on, do not remove the disk, power down your
computer or use the standby or hibernation function (
tion Functions").
Be sure to create the Backup Disk.
If a Backup Disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
10
Windows NT
Install the Acrobat
NOTE
Acrobat ® Reader is necessary to view the Reference Manual, which explains de-
tailed operational procedures concerning your computer.
In [Start] - [Run], input [c:\util\reader\ar40eng.exe], then press [OK].
1
Press [Next].
2
After reading the "Software License Agreement", select [Accept] if you agree to the
3
terms.
Press [Next].
4
At the [Setup Complete], select [Yes, I want to restart my computer now], then select
5
[Finish].
This concludes the first-time use operation guidelines.
Reader 4.0
®
"Standby/Hiberna-
13