Epson PowerLite 570 Quick Setup page 3

Network configuration
Install the EasyMP Network Projection software on each computer that will
project over the network. Use the CD labeled EPSON Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Network Projection Operation
Guide (requires an internet connection). If you don't see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson support site (see "Where to get help").
To monitor and control your projector over the network, download and
install the EasyMP Monitor software (Windows only) and manual from the
Epson support site. You can install a link to the downloads page from the
projector CD or go to the Epson support site (see "Where to get help").
Follow the steps here to configure your projector for your wired network
using the projector's menu system.
1
Press the Menu button on the remote control, select the Network
menu, then press .
2
Choose Network Configuration and press
3
Select the Wired LAN menu and press
4
Choose IP Settings and press
5
If your network assigns addresses automatically, turn on the DHCP
setting. If not, make sure DHCP is off and enter the projector's IP
Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
6
When you are finished, select Complete and press
again to save your settings.
7
Press the Menu button to exit the menu system.
Mobile device
To project from an iOS or Android™ device,
download and install the Epson iProjection™ app.
Visit www.epson.com/projectorapp (U.S.) or
www.epson.ca/projectorapp (Canada) for
more information.
.
.
. You see a screen like the following:
, then press
Using web remote
You can use a standard web browser to control the projector through the
network. A "virtual remote control" on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Open your web browser and enter the IP address of the projector you
want to monitor in the browser window.
If you're not sure what the address of the projector is, turn the projector
on and select Net. Info.-Wired LAN or Net. Info.-Wireless LAN from
the Network menu to display the IP address of the projector. (Do not
enter the leading zeroes.)
2
Enter EPSONWEB as the default user name and admin as the default
password, then press .
3
From the Projector Control menu, select Web Remote. Use the on-screen
buttons to operate the projector, as you would using the remote control.
Select video signal
Select computer signal
Turn off picture
and sound
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing.
•
Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your keyboard
that lets you display on an external monitor. It may be labeled CRT/LCD or
have an icon such as . You may have to hold down the Fn key while
pressing it (such as Fn + F7). Wait a moment for the display to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Select the display or Color LCD option if necessary, then click the
Arrange or Arrangement tab, and select the Mirror Displays checkbox.
Select equipment connected to
the USB port
Select wired or wireless
network signal
Pause video
Display closed
captions