Table of Contents
Advertisement
Configuring SSO Agent settings on Actions > Properties
The Actions > Properties page provides a number of configuration settings for the SSO Agent.
Figure 2. Actions > Properties page
To configure the SSO Agent settings:
1
In the DSC Configuration Tool, select SonicWALL SSO Agent in the left pane and then navigate to the
Actions > Properties page.
2
For Host IP, type in the IP address of the machine with the SSO Agent installed.
3
For Logging Level, select one of the following from the drop-down list:
•
0 - No logging
•
1 - Errors will be logged
•
2 - Debug messages and errors will be logged
•
3 - Diagnostic messages, debug messages, and errors will be logged
4
For Cache Refresh Time, enter the number of seconds that items should remain in the SSO Agent cache.
The default is 60 seconds, the range is 30-600 seconds. For more information, see
cache
on page
8
5
For Max Thread Count, enter the maximum number of threads that the SSO Agent can use at one time.
The default is 300, the range is 50-999.
6
For Query Source, select the desired method for the SSO Agent to identify the user. Select one of the
following from the drop-down list:
•
NETAPI - Use NETAPI to identify the user (default)
•
WMI - Use WMI to identify the user
and
Using the SSO Agent cache
on page 36.
Dell SonicWALL Directory Services Connector 3.7
About the SSO Agent
27
Administration Guide
Advertisement
Table of Contents
