Table of Contents
Advertisement
The agent configuration settings screen appears.
3
Select the Allow Agent synchronization checkbox and enter 2260 (the default port for Agent-to-Agent
Communication) in the Agent sync Port field.
NOTE:
This option is only available when Query Source is set to DC Security Log with or without
NetAPI and/or WMI, and when Enable Scanner is selected when Query Source is set to either NETAPI
or WMI. Agent synchronization can be used between agents which are using different Query Source
methods.
4
Click OK.
Using the SSO Agent cache
The SSO Agent can cache user information. By default, the cache refresh rate is set to 60 seconds, with a range
of 30–600 seconds.
The cache settings can be overridden from the Windows Registry. To disable caching (cache refresh time = 0),
edit the Registry and set the REFRESHTIME value to 0. If the cache refresh rate is set to zero seconds, user
information is fetched from the workstation for every request from the Dell SonicWALL appliance.
See
About the SSO Agent cache
on page
8
for more information on when the cache can be helpful.
Dell SonicWALL Directory Services Connector 3.7
36
Administration Guide
Advertisement
Table of Contents
