Advertisement

Aqua Logic, Inc.
9558 Camino Ruiz.
San Diego, CA 92126
PH: 858.292.4773 Fax: 858.292.0537
Email: info@aqualogicinc.com
Website: www.aqualogicinc.com
__________________________________________________________________________________________
Installation and Maintenance Manual
For
Delta Star Water-cooled Marine Duty
In-Line Water Heat Pumps
(Models DSHP-4-WCMD thru DSHP-10-WCMD)
DSHP-9-WCMD shown
Use Quick Install page for easy setup
.
Copyright© 2016 Aqua Logic, Inc. Effective date of 1/2016
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSHP-4-WCMD and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Logic DSHP-4-WCMD

  • Page 1 Email: info@aqualogicinc.com Website: www.aqualogicinc.com __________________________________________________________________________________________ Installation and Maintenance Manual Delta Star Water-cooled Marine Duty In-Line Water Heat Pumps (Models DSHP-4-WCMD thru DSHP-10-WCMD) DSHP-9-WCMD shown Use Quick Install page for easy setup Copyright© 2016 Aqua Logic, Inc. Effective date of 1/2016...
  • Page 2 Thank you for selecting an Aqua Logic Water-cooled Marine Duty Delta Star Heat Pump. We have endeavored to manufacture the most reliable and efficient water Heat Pump available. Our highly trained technicians use premium quality components to assemble equipment that will operate faithfully for years.
  • Page 3: Delta Star Plumbing

    • We highly recommend that you use a ground-fault interrupter (GFI) to avoid electrical shock. You can obtain an inline GFI from Aqua Logic, a local hardware store if the outlet in the wall does not have a GFI installed.
  • Page 4 Regulate condenser water until pressure on the pressure gauge reads between 115 to 125 PSIG for models DSHP-4-WCMD thru DSHP-9-WCMD and 195 to 220 PSIG for model DSHP-10-WCMD. Check after 15 minutes of run time, adjust the water flow (if needed) to the correct pressure.
  • Page 5: Heat Pump 2 Stage Controller Programming

    CL - Appears if calibration mode has been entered. To correct: Remove power to the control for least five seconds. Reapply power. If the CL message still appears, replace the control Copyright© 2016 Aqua Logic, Inc. Effective date of 1/2016...
  • Page 6 Heat Pump—especially a ½-HP unit needed on a 300-gallon tank. It is very unfortunate when equipment fails. However, a prudent aquarist should have a disaster plan and follow the motto, “Be prepared.” Copyright© 2016 Aqua Logic, Inc. Effective date of 1/2016...
  • Page 7: Maintenance And Cleaning

    Allow the heat exchanger to dry and then return the Heat Pump to service. NOTES: If you have any questions or concerns about maintaining your Aqua Logic Heat Pump, please call us at (858) 292-4773. Copyright© 2016 Aqua Logic, Inc. Effective date of 1/2016...
  • Page 8: Specifications

    Specifications Aqua Logic Water-cooled Marine Duty Delta Star Heat Pump features: • Non-toxic titanium heat exchanger and condenser for use in fresh and saltwater applications. • Stainless steel stand with ABS protective cover. • Made in the USA • Limited 1-year warranty...
  • Page 9: One-Year Limited Warranty

    • Once Aqua Logic determines that the defect is due to parts or workmanship and that the product is under warranty, Aqua Logic will repair or replace the product solely at their discretion. Our warranty does not cover the following: •...

Table of Contents