Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Intraphex TMN-NI11
Summary of Contents for Intraphex TMN-NI11
- Page 1 TMN-NI11 Infiniti Q50 Navigation Installation Manual...
- Page 2 • External Speaker • GPS Antenna • RCA Harness • Momentary Switch 8GB SD Card With Intraphex Navigation Software • Install / Users Guides This manual explains the installation and wiring of the TMN-NI11 Navigation System / Reverse Camera Interface.
- Page 3 RED-REV. CAM WHITE-V2 YELLOW-V1 MENU UP DOWN SD CARD POWER/CAN T-HARNESS CAN BOX...
- Page 4 DOWN = ON UP = OFF RGB Input Enabled RGB Input Disabled Video 1 Input Enabled Video 1 Input Disabled Video 2 Input Enabled Video 2 Input Disabled Resolution 800x480 Aftermarket Backup Camera OEM Camera (Red RCA Input) Normal Operation Normal Operation Normal Operation Can Connect Harness:...
- Page 5 Set monitor assembly aside in a safe location until it is time for re-assembly. Plug the provided Intraphex Pow- er and LVDS T-harnesses into the factory harnesses. Note: There will be one extra factory harness not used.
- Page 6 Please see wiring diagram. Note: Not all ports on interface will be used. Find a suitable location to mount the Intraphex interface and CAN box. Make sure to run your antenna to desired location, and choose how you are going to wire...
- Page 7 Option 2: Cut the plug off of the included Intraphex speak- er. Choose a speaker in the vehicle you would like to use (a center channel or door speaker is ususally most suitable).
-
Page 8: Screen Calibration
Navigation SD card into the interface and press the navigation icon. NAVIGATION SETUP Once you have loaded the Intraphex Navigation software, you will need to go through an initial setup. The software is defaulted for the United States, so you may simply hit next through the entire process. - Page 9 It is generally not needed, but you may fine tune the screen to your liking. Located on the bottom of the interface are the Menu/Up/Down buttons. These buttons are recessed, so you will need a pick-tool or small screwdriver to press them. Once in the menu you can fine tune the pic- ture, adjust alignment, etc.
- Page 10 To switch into the navigation source from the factory screen, simply press the “Home” button located directly below the factory monitor for 1 second. To switch back to the factory screen, just give the Home button a short press. If you are using additional video inputs, you will continue to give the Home button 1 second presses.
- Page 11 THREE (3) years from date of purchase. A sales receipt, showing the installation date and INTRAPHEX product details are required to verify proof of purchase. Should the product(s) be determined defective during the applicable warranty period, the defective product(s) will be repaired or replaced with a reconditioned product(s), at INTRAPHEX’s sole option.
- Page 12 Toll Free Tech Support: 888-228-5560 Local: 727-803-0324 Email: support@aampofamerica.com...
Need help?
Do you have a question about the TMN-NI11 and is the answer not in the manual?
Questions and answers