Advertisement
Quick Links
Instructions
Model: MAXIMA XL – 2/3Groups
Note: Do not install the machine without reading this manual first. Serious damages can be
caused to the machine if the installation is not done properly!
1- Steam and water levers
2- Cups warmer
3- Touchpad with 5/6 blue buttons
4- Electronic level of water
5- Pressure gauges
6- Main switch
7- High groups type E-61
8- Water spigot
9- Steam wand
10- Stand for cups
11- Service tray and drain
12- Adjustable legs
Features:
Power: 2.600 / 3.500 Watt
Capacity Boiler:
2 /3 groups: 12 /18 Liters
1- START – INSTALLING THE MACHINE
This '1000espressos' model is a medium range, 2 group professional espresso machine.
Before we plug the machine, we must connect the inlet water and drain pipes and make
sure that the installation of the local (bar, restaurant, etc) is according to law, with enough
power to install a coffee machine and a proper earth connection. This machine is a single
phase, 220/230V and 50 Hz, but it can also be supplied at 110V/60Hz.
So, please check the points described down here before turning on the machine:
1- Connect the gray drain pipe to permit the machine to drain properly.
2- Make sure also that the metallic inlet water pipe is well connected.
3- Install a plug on the main cord, and connect the machine to power (Usually the
machines come with 4 cables on the main cord. Blue –neutral, Yellow/Green –
earth, Brown – 1 phase, Black – 1 phase. You can wire together the Brown and
Black to get only 1 phase).
After the machine is plugged, connected to drain and to water inlet pipe, then we can
proceed to TURN it ON...
...NOW THE MACHINE IS READY TO WORK!
2- FIRST TIME CONNECTION
1- Please place the main switch to position 2 (indicated on the panel). This will allow
the machine to start filling the boiler keeping the heating element Off.
2- If the boiler is not full after 120 seconds, touch pads will blink. If this happens,
place the main switch to position 0 and start again.
3- When the boiler is filled of water, we must place the main switch to position 1,
which will permit the heating element working.
Advertisement
Summary of Contents for 1000espressos MAXIMA XL
- Page 1 1- START – INSTALLING THE MACHINE This '1000espressos' model is a medium range, 2 group professional espresso machine. Before we plug the machine, we must connect the inlet water and drain pipes and make Instructions sure that the installation of the local (bar, restaurant, etc) is according to law, with enough power to install a coffee machine and a proper earth connection.
- Page 2 4- Take some water out of the groups in order to release possible air inside the 4- PROGRAMMING THE MACHINE system. Also, the electronic level indicator (placed between the 2 touch pads) will indicate at any time if the boiler has or not the necessary level of water, and the This machine comes only in Automatic version, so use the touchpad to program the quantity pump and the solenoid will automatically work each time the boiler needs water.