Advertisement
Maintenance & Storage
1. To avoid motor overheating of a filter pump, make sure pool water is always flowing
into the filter pump. Also, ensure the surface skimmer is perpendicular to the water
surface and below the water surface. Then open the air release valve located on the
filter enclosure top cover, and close the air release valve when water starts to flow.
2. Periodically check and remove any obstacle from the opening of floating skimmer.
3. Clean regularly of the debris, sediments or leaves that traps in the skimmer basket.
4. Remove the skimmer and hanger from the pool before placing a pool cover.
5. To avoid hazard of electrical shock, always disconnect the power cord from the
electric outlet when disassembling.
6. Clean and air dry all the accessories thoroughly after disassembly. No lubrication or
regular mechanical maintenance is needed.
7. You could take advantage of the original packing carton by storing all the parts for
next season. Store in a dry, cool storage location.
8
www.jilong.com
PSS-14-GB
Advertisement
