Traeger TFB88PUB/ZB Owner's Manual page 24

FREQUENTLY ASKED QUESTIONS
Question
With the Traeger
Digital Pro
Controller, what
dial setting is
recommended for
starting the grill?
How do I protect
my paint finish?
Where can I get a
new part for my
grill?
24
66103_PRO15_v10.indd 24
The auto-start procedure is the same for all grill controls. With the door open, turn
the switch ON (|) and turn the temperature dial to SMOKE. In about 2 minutes, the
pellets will ignite and whitish-gray smoke will come out of the grill. After the pellets
have ignited, close the door and turn the temperature dial to any cooking setting
desired.
Use a protective cover on the grill and touch-up paint to repair any scratches. A
Traeger Grill Cover is highly recommended to protect the grill! Covers and touch-up
paint are available from your Traeger dealer, or log onto our website, traegergrills.com.
Every 90 days, use a high-quality car wax on the outside surfaces of the grill. ONLY
APPLY WAX TO A COLD GRILL.
Check with your Traeger dealer. They may
have the part in stock or can order the part
for you.
Contact Traeger's VIP-365 Customer Service
(see page 27) to place an order.
Answer
In either case, please provide your
name, phone number, address,
model, and serial number of the grill
(located on the label inside the hopper
lid), along with the part identification
number from the component diagram
or parts list.
(cont.)
11/12/15 11:30 AM