Table of Contents
Advertisement
8. PRIVACY AREA SHIELD
The user can set privacy area on the image randomly. If the function on, the user can
enter the setting menu. The setting page is show as below:
1)
AREA SEL - There are 8 zones that can be set. Their size can be adjusted by 4
buttons--up, down, left and right. The default setting is 0. If the user does not adjust
the area size, the square grid will not appear.
2)
COLOR - For every zones' color setting, the user has 8 options—red, green, blue,
light green, light blue, light red, white and black.
3)
TRANSP - The function is used for setting privacy area's transparency. There are 4
options--0.00、0.05、0.75 and 1.00 .
4)
MOSAIC - Set the privacy area to mosaic. Notice the privacy area will be dim if the
transparency is too high. It will be clear if the setting value is adjusted to 0.00.
PRIVACY
PRIVACY
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
COLOR
TRANSP
OFF
1/8
000
000
000
000
1
1 00
Advertisement
Table of Contents
