Table of Contents
Advertisement
1)
LUMINANCE - 3 options—HIGH, MID and LOW
2)
CONTRAST - 5 options—HIGH, MIDHIGH, MID, MIDLOW, LOW
7. MOTION DETECTION
When a moving object appears in the set detection area, the camera will alarm. We can
enter the setting menu if the function is on.
1)
DETECT SENSE - Used to set the camera's detect sensitivity. The setting value
range is 0～127.
2)
BLOCK DISP - A block display switch. If the function on, the moving object would be
traced by a flashing square grid.
3)
MONITOR AREA - A monitoring area switch. If the function on, the square grid will
appear in the monitor area.
4)
AREA SEL - There are 4 monitor areas that can be set. The size can be adjusted by
4 buttons--up, down, left and right. The default setting is 0. If the user does not adjust
the area size, the square grid will not appear.
MOTION DET
MOTION DET
DETECT SENSE
BLOCK
MONITOR
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
ON ←
111
DISP
OFF
AREA
ON
1/4
000
000
000
000
11
Advertisement
Table of Contents
