Advertisement
9114 48942 MUK Grater
6/4/05
4:57 pm
Important safety
instructions
The use of any electrical appliance
requires the following of basic common
sense safety rules.
Primarily there is danger of injury or death
and secondly the danger of damage to the
appliance. These are indicated in the text by
the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance!
In addition we offer the following essential
safety advice.
Location
• Do not use charger outdoors.
Charger lead
• The charger lead should reach without
straining the connections.
• Do not let the charger lead hang over the
edge of a worktop where a child could
reach it.
• Do not let the charger lead run across an
open space e.g. between a low socket
and table.
• Do not let the charger lead run across a
cooker or toaster or other hot areas which
⁄
¤
‹
›
‡
fi
fl
2
Page 2
might damage the cable.
Personal safety
• Unplug from outlet before cleaning or
removing parts.
• WARNING: Do not touch moving
parts. Keep hands, hair, clothing as
well as utensils away from the barrel
blades.
• WARNING: Take care when handling
metal blades as they are very sharp.
• WARNING: To protect against fire,
electric shock and personal injury do
not immerse charger or motor unit in
water or other liquid.
Children
• Do not allow children to use this grater.
Children are vulnerable in the kitchen
particularly when unsupervised and if
appliances are being used or cooking is
being carried out.
• Teach children to be aware of dangers in
the kitchen, warn them of the dangers of
reaching up to areas where they cannot
see properly or should not be reaching.
Other safety considerations
• Do not operate any appliance with a
damaged charger lead or after the
Ê
·
appliance malfunctions or has been
damaged in any manner. Contact our
helpline for advice on examination and
repair.
• Do not use accessories not
recommended by the manufacturer as
there is the danger of fire, electric shock
or personal injury.
• Do not place on or near a hot gas or
electric burner or in an heated oven.
• Do not allow metal objects to touch the
charging contacts on the motor unit or
cradle. Damage to the batteries and
charger will result.
Electrical
requirements
Check that the voltage on the rating plate
of your charger corresponds with your house
electricity supply which must be A.C.
(Alternating Current).
Use only the charger unit supplied.
Features
⁄ Handle
¤ Start button
‹ Motor unit
› Charging cradle
A
fi Charger cable and connection
fl Spatula
‡ Barrel housing end cover
· Grating and slicing barrels x 3
‚
‚ Handle cover and food pusher
„ Food pusher
‰ Food hopper
„
 Barrel housing and food dispenser
Ê Charger
‰
Unpacking
Â
Carefully unpack your grater as the
blades can be very sharp. Remove any
stickers (except for serial label) and wash all
Ê
the parts that are safe to immerse in water
fl, ‡, ·, „ and Â.
Charging
The grater is designed to be left on
charge constantly so that it is always ready
to be used.
When new and charging for the first time
(or the grater has not been on charge for a
long period), charge for 24 hours.
1 Attach the charger cable fi to the
charging cradle B.
2 Locate the motor unit ‹ into the
charging cradle ›.
3 Plug the charger Ê into a suitable 13A
socket outlet and switch on.
Assembly
C
1 Slide off the end cover ‡ and insert a
grating or slicing barrel · into the barrel
housing Â.
2 Slide the end cover back over the end of
the barrel until it clicks into place.
B
C
3
Advertisement
