Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 20 3000 Series Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Connect the display cable to the display assembly and close the latch to
secure the cable.
2 Adhere the tape that secures the display cable to the display assembly.

Post-requisites

1 Replace the
2 Replace the
3 Replace the
4 Replace the microphone.
5 Replace the
6 Replace the
7 Replace the
8 Replace the
9 Follow the procedure in step 4 in
10 Replace the stand.
system board.
heat sink.
system-board shield.
control-buttons
wireless card.
memory module.
back cover.
computer. After working inside your
After working inside your
board.
"Replacing the optical drive".
71