6
Setup and Reset
6.6
Source Detection
You can activate
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.6.1 Configuring Source Detection
1
When the Function Key Guide appears, select [
Button.
Next, press the [
2
Press [
3
Press [
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4
Move the focus to the desired option by pressing [
Press [
] button.
5
The selected option will be applied.
Source
Detection.
] button.
] button to move to
SETUP&RESET
] button to move to
Source Detection
SETUP&RESET
Reset All
Eco Saving Plus
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
] by pressing [
] button on the DOME Type JOG
and press [
] button on the monitor.
and press [
] button on the monitor.
Decide how input
sources will be
detected.
Off
Auto
Auto
Manual
] button on the DOME Type JOG Button.
70
6 Setup and Reset