Testing Transaction; Using The Pin Pad; Cleaning; Maintenance - First Data FD-10 Quick Setup Manual

Testing transaction

A test transaction should be performed upon installation to ensure
trouble-free operation of the PIN Pad.
Using a live ATM card, execute a transaction for one cent utilizing
ATM/debit sale as outlined in the processing device manual.
Note: This is a live transaction and the checking or savings account will be debited for
one cent. Also, remember to assure the security of the cardholder's PIN.

Using the PIN Pad

To complete a transaction, the PIN Pad device displays the
following prompt: ENTER PIN. Key in your PIN and press [ENTER].
The device returns to the READY message after it successfully
receives the PIN entry.
Note: If the PIN is entered incorrectly, press [CANCEL] and re-enter it.

Cleaning

Periodically clean the PIN Pad device with a clean cloth dampened
with water and a mild soap or cleaner. Do not use harsh chemicals.

Maintenance

Stringent quality-control standards are followed in manufacturing
all PIN Pad devices. Numerous tests are performed on each unit
before leaving the factory to ensure quality and reliability.
Caution: Risk of explosion if the battery is replaced by an incorrect type. Please dispose
of the used battery according to local regulations.
Note: Do not try to service, repair or adjust the PIN Pad device in any other way; doing so
will void your warranty.

Returning the FD-10 PIN Pad

If you need to return your PIN Pad device for service or replacement,
contact your service provider or sales representative for instructions.
Warning: A shielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference with nearby radio and television reception. Use only the
power cord supplied.
Caution: Use only shielded signal cables to connect I/O devices to this equipment.
Changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
3