Supra Sunsport 22V Owner's Manual page 38

Soft Key Commands for User Settings include:
UP – DOWN – changes the value of the current field.
PREV – NEXT – moves from field to field.
RESTORE DEFAULTS - Loads the factory defaults after displaying
a confirmation warning.
SAVE/EXIT – saves the current values and exits.
Ambient Light
Night and Day options are provided for ambient lighting. The
screens below illustrate these options. When the ambient
lighting settings are changed in User Settings, the power-on
default is changed.
NOTE: The ambient lighting option is also accessible through
the Soft Key Commands on the GPS/Track Info screens. Selecting
DAY/NIGHT toggles the display to the opposite mode.
NavLight
Setting the NavLight to 'Enable' allows the unit to automatically
display in Night View when the Nav Lights are enabled. You can
still toggle between Day and Night View through the soft key
commands.
Brightness
You can set the brightness control by using the UP and DOWN
soft keys to change the settings in 5% increments until the
desired brightness is achieved.
Video
Specify how video will be displayed from the following
choices:
• Disable Video
• Enable Half Screen Mode
• Enable Full Screen Mode
• Enable Full and Half Screen Mode
Minimum Depth
This allows you to choose a minimum depth (measured from
bottom of keel) to give an alarm if the vessel comes into a
minimum depth situation. Choosing zero turns this option off.
— 
11_Supra Owner Manual.indd 38
Audio Settings
The Audio Settings feature allows you to set values to
automatically increase or decrease the audio volume according
to what speed you are traveling.
Volume Up
This allows you to set how much the stereo volume will increase
when the crossover speed is reached when accelerating.
Volume Down
This allows you to set how much the stereo volume will decrease
when the crossover speed is reached when decelerating.
The Crossover point is determined on the Utilities/Default
Settings menu.
Engine Diagnostics
When choosing this selection, the display will query the
engine(s) ECU, as illustrated below, and provide feedback on
any diagnostic codes that have been activated and stored in
the ECU for service needs.
© 2011 Skier's Choice, Inc.
11/13/2010 3:34:12 PM