NEC MobilePro 770 Getting Started page 5

Locate the release lock on the bottom of the system.
2.
3. Slide the lock to the unlocked position in the direction
of the arrow as indicated in the following figure.
Put the Lithium-Ion battery pack in the bay and slide
4.
the battery in the direction of the arrow, as indicated in
the following figure.
Inserting the battery pack
A – Battery release lock B – Lithium-Ion battery pack
Firmly press the battery until it is secure and clicks
5.
(locks) into place.
Slide the lock back to the locked position.
6.
Note:
Be sure to slide the lock back to the
locked position. The NEC MobilePro will not power
on when the lock is in the unlocked position.
Charge the main battery while you work or explore the
7.
software on your new H/PC by connecting the AC
adapter.
Getting Started 1-5