Positioning Your Zotac Zbox; Installing The Stand; Attaching Your Zotac Zbox To A Display - Zotac ZBOX Instruction Manual

Hide thumbs Also See for ZBOX:

Table of Contents

ZOTAC ZBOX

Positioning your ZOTAC ZBOX

 Do not position the ZOTAC ZBOX where the ventilation holes are covered. To guarantee

proper use, leave 4 inches (10 cm) spacing in front of the ventilation holes.

 ZOTAC Mini PC systems provide ample connectivity in a compact form factor, please choose

connectors and cables in appropriate sizes to avoid interference.

Position your ZOTAC ZBOX upright with the supplied stand. To do so :

Locate the key hole on the bottom of the ZOTAC ZBOX.

Align the stand key to the ZBOX key hole and slide the stand forward to lock into place..

 Do not place your ZOTAC ZBOX on the desktop without the stand.

You can also attach your ZOTAC ZBOX to the back of a display. To do so:

Secure the VESA mount to your display with four screws (HNM/M4x8).

Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and snap the

ZBOX into place on the mount.



To fasten the VESA mount, your display must comply with VESA75 Or VESA100 standard.

Mechanical Loading Stability - Please ensure the display rests on a stable platform before



attaching ZOTAC ZBOX to prevent damage or injuries from a fall or drop.



If the total weight of your display and ZOTAC ZBOX is over 7kg, the system may be unstable.

Table of Contents